Motorized Rotation Stage, 120 mm, High-Speed DC Drive

RV High Performance DC Motor Rotation Stages

The RV120CC High Speed Rotation Stage provides high-precision angular positioning accuracy combined with high load capacity. This 120 mm diameter stage features a high speed DC drive enabling speeds up to 80°/s. All RV stages are constructed of tool steel, with rotation accuracy ensured by ground bearing surfaces. A double row of preloaded bearings allows for high off-center loads in a reduced footprint. The single monolithic design offers improved stiffness without compromising dynamic performance. Precise rotation is ensured by a precision ground and hardened worm gear. A rotary encoder mounted on the worm gear shaft provides 0.001° position feedback resolution.

Steel Construction

The tool steel construction ensures enhanced rotation accuracy due to the ground bearing surfaces. The single monolithic design offers improved stiffness and thermal stability without compromising dynamic performance.

Highest Load Capacity

The double row of preloaded ball bearings allows for higher off center loads for its small footprint. The largest member of the RV DC motor product family can bear up to 650 kg or rotate up to 80 °/s while maintaining eccentricity of less than 4 µm.

High Speed and High Torque DC Motor Versions

High speed (CC and HAT) and high torque (CCHL, HAHL and HAHLT) versions of the RV DC motor stages are available. The high speed versions enable speeds up to 80°/sec. The high torque versions are equipped with a reduction gear which provides higher torque and payload inertia capacity. A rotary encoder is mounted on the worm gear shaft of the CC and CCHL versions. When superior repeatability, position stability and speed regulation is needed, the high speed HAT and high torque HAHLT versions feature a high-resolution direct reading encoder and tachometer. (RV120HAHL includes direct reading encoder, but no tachometer.)

Configurable Limit Switches

Most of the RV models are designed with optical limit switches to limit movement to 170°. These can be enabled or disabled for complete 360° motion with a simple "Allen" wrench.

Metrology Report Included at No Additional Cost

Newport guarantees specification values which are measured and recorded following ASME B5.57 and ISO 230-2 standards. The typical performance values are two times better than the guaranteed specifications.

Specifications

Technical Specs

Angular Range
360°
Maximum Speed
80°/s
Minimum Incremental Motion
1.0 mdeg
Maximum Torque
10 N·m
Centered Load Capacity
1800 N
Uni-directional Repeatability, Typical
±0.35 mdeg
Uni-directional Repeatability, Guaranteed
±1.0 mdeg
Bi-directional Repeatability, Typical
±0.7 mdeg
Bi-directional Repeatability, Guaranteed
±2.0 mdeg
Accuracy, Typical
±4.0 mdeg
Accuracy, Guaranteed
±7.5 mdeg
Wobble, Typical
±5.0 µrad
Wobble, Guaranteed
±10 µrad
Eccentricity, Typical
±0.6 µm
Eccentricity, Guaranteed
±2.0 µm
Inertia
0.2 kg.m²

Transversal Compliance
1.5 µrad/N·m
Origin
Optical, centered
Origin Repeatability
±0.5 mdeg
Limit Switches
Optical, at ±170, can be disabled for continuous rotation (except HAT & HAHLT versions)
Encoder Resolution
0.001°
MTBF
20,000 h (25% load, 10% duty cycle)
Cable Length
3 m
Diameter
120 mm
Aperture Diameter
78 mm
Connector Type
DB25 Male
Thread Type
M4
Maximum Power Consumption
130 W
Weight
6.5 kg
Compliance
RoHS 3, CE

Angular Range
360°
Maximum Speed
80°/s
Minimum Incremental Motion
1.0 mdeg
Maximum Torque
10 N·m
Centered Load Capacity
1800 N
Uni-directional Repeatability, Typical
±0.35 mdeg
Uni-directional Repeatability, Guaranteed
±1.0 mdeg
Bi-directional Repeatability, Typical
±0.7 mdeg
Bi-directional Repeatability, Guaranteed
±2.0 mdeg
Accuracy, Typical
±4.0 mdeg
Accuracy, Guaranteed
±7.5 mdeg
Wobble, Typical
±5.0 µrad
Wobble, Guaranteed
±10 µrad
Eccentricity, Typical
±0.6 µm
Eccentricity, Guaranteed
±2.0 µm
Inertia
0.2 kg.m²

Transversal Compliance
1.5 µrad/N·m
Origin
Optical, centered
Origin Repeatability
±0.5 mdeg
Limit Switches
Optical, at ±170, can be disabled for continuous rotation (except HAT & HAHLT versions)
Encoder Resolution
0.001°
MTBF
20,000 h (25% load, 10% duty cycle)
Cable Length
3 m
Diameter
120 mm
Aperture Diameter
78 mm
Connector Type
DB25 Male
Thread Type
M4
Maximum Power Consumption
130 W
Weight
6.5 kg
Compliance
RoHS 3, CE

Resources & Downloads

3D Product Models

Download CAD Files

Application Notes

Custom 2-Axis Gimbal for Remote Sensing Instrument Test and Qualification(333 kB, PDF)
Fiber Spool Winding Application with Custom 5-Axis Motion System(145.1 kB, PDF)

2D Product Drawings

RV120(452.6 kB, PDF)

Literature

RV Data Sheet.pdf(3.2 MB, PDF)

Manuals

RV - User's Manual.pdf(2.5 MB, PDF)

Related Products

Compatible Controllers and Drivers

Based on axis required, choose a specific controller to pair with the stage. For XPS-D or XPS-RLD, a driver module is required. Spindle mode is only available with XPS controllers.

	Compare	Description	Compatibility	Drawings, CAD & Specs	Avail.	Price
		XPS-D Universal High-Performance 1-8 Axis Motion Controller and Driver¹XPS-D Universal High-Performance 1-8 Axis Motion Controller and Driver	UNIVERSAL
		XPS-RLD Universal High-Performance 1-4 Axis Motion Controller and Driver²XPS-RLD Universal High-Performance 1-4 Axis Motion Controller and Driver	UNIVERSAL
		ESP302 3-Axis DC and Stepper Motion Controller³ESP302 3-Axis DC and Stepper Motion Controller	UNIVERSAL

Notes:

Requires XPS-DRV11 driver module
Requires XPS-DRV11 driver module
Plug and play compatible with ESP302 controller

Accessories

Description	Compatibility	Avail.	Price
MMCABLE-REGInline Regulator, 5 VDC, for MMCABLEs 5 m or longer	UNIVERSAL	In Stock	$252
M-PBN16Base Plate, PBN Series, Use with UTR160 Series Rotation Stages	UNIVERSAL	Contact Us FREE 2-day shipping on thousands of products on Newport.com Learn More	$226
M-SK-M4ABlack Oxide Screw Kit, M4, Assortment, Qty 249	UNIVERSAL	In Stock FREE 2-day shipping on thousands of products on Newport.com Learn More	$75
M-FK-BLXL-Allen Wrench Set, Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm, Metric	METRIC	In Stock FREE 2-day shipping on thousands of products on Newport.com Learn More	$37

Similar

Description	Compatibility	Avail.	Price
URS150BCCMotorized Rotation Stage, DC Motor, Continuous 360° Motion, URS150	UNIVERSAL	3 Weeks	$6,468
RV120HATMotorized Rotation Stage, 120 mm, High-Speed DC Drive, Direct Encoder	UNIVERSAL	12 Weeks	$14,033
BGM120CCMotorized Goniometer, ±45° Travel Range, DC Motor Drive, BGM120	IMPERIAL	Contact Us	$14,210
RV120CC-FMotorized Rotation Stage, 120 mm, High-Speed DC Drive, Folded	UNIVERSAL	8 Weeks	$9,077

Frequently Purchased Together

Description	Compatibility	Avail.	Price
XPS-D2Universal Motion Controller, High Performance, 2-axis, Ethernet	UNIVERSAL	In Stock	$8,816
MMCABLE-REGInline Regulator, 5 VDC, for MMCABLEs 5 m or longer	UNIVERSAL	In Stock	$252
XPS-DRV11Motion Controller Card, Universal, Stepper, DC, and Linear Motors	UNIVERSAL	In Stock FREE 2-day shipping on thousands of products on Newport.com Learn More	$865