Motorized XYZ Linear Stage, 25 mm, 10 nm MIM, DC Servo, Tach, Metric
Model: M-VP-25XL-XYZR
Product Series Overview
VP Compact Aluminum DC Motor Linear StagesThe M-VP-25XL-XYZR Metric Precision Compact Linear Stage provides high-precision positioning performance in an ultra-compact form factor. A low friction ball screw drive provides robust, reliable performance with excellent thrust and minimal heat induced position drift. Combined with excellent minimum incremental motion of 0.01 μm and travel of 25mm, the M-VP-25XL-XYZR is ideal for applications requiring fine manipulation of small parts such as alignment of optical fibers. Featuring a manual adjustment knob, M-VP-25XL-XYZR stages are versatile enough to handle automated and non-automated tasks alike. Typical applications include fiber alignment, micro-assembly, and micromachining.
Backlash-free Ballscrew
Micro-positioning
The VP-25XL series features a linear steel scale encoder ensuring positioning with accuracy of ±1 µm is possible when commanded by the XPS advanced motion control system.
DC Motor for Smooth, High Speed Motion
DC Motors are best characterized by their high speeds, smooth motion, good efficiency and a high power/weight ratio. Precise closed-loop servo positioning and speed control on these VP stages is achieved with a built-in linear encoder and included tachometer. A manual adjustment knob also adds to the utility of these stages.
End-of-Run Limit Switches
Metrology Report Included at No Additional Cost
Error Mapping Services
For critical positioning applications, Newport offers error mapping upon request for VP-25XL stages driven by our XPS advanced motion controller. We will measure, implement, and verify the results of this error map that will individually optimize each stage's position accuracy. In addition, multi-axis error mapping is also available. Measurements are made at 20.0 ±0.2 °C. A certificate of calibration will be provided with your stage. Actual data may also be provided upon request.
Specifications
- Motorized AxesXYZ
- OrientationRight-Handed
- Travel Range25 mm
- Maximum Speed25 mm/s
- Minimum Incremental Motion10 nm
- Centered Load Capacity35 N
- Axial Load Capacity (+Cx)40 N
- Inverse Axial Load Capacity (-Cx)-40 N
- Accuracy, Typical±0.5 µm
- Accuracy, Guaranteed±1.0 µm
- Bi-directional Repeatability, Typical±0.05 µm
- Bi-directional Repeatability, Guaranteed±0.07 µm
- Pitch, Typical±20 µrad
- Pitch, Guaranteed±50 µrad
- Compliance in Pitch20 µrad/Nm
- Yaw, Typical±20 µrad
- Yaw, Guaranteed±50 µrad
- Compliance in Yaw30 µrad/Nm
- Compliance in Roll20 µrad/Nm
- BearingsRecirculating ball bearings
- Drive TypeDC Servo with Tachometer
- Drive MechanismBacklash-free ball screw
- Drive Screw Pitch1 mm
- FeedbackLinear Encoder
- Limit SwitchesOptical
- OriginOptical, centered
- Origin Repeatability±0.05 µm
- Cable Length3 m
- Connector TypeDB25 Male (3) and DB15 Male (3)
- Thread TypeM3, M4, and M6
- Weight5 kg
- MTBF20,000 h (25% load, 30% duty cycle)
- Maximum Power Consumption30 W
- ComplianceRoHS 3, CE
Resources & Downloads
3D Product Models
Literature
Telecom Data Brochure(4.9 MB, PDF) VP-25X Data Sheet.pdf(2.1 MB, PDF)
Other
M-VP-25XL-XYZR RoHS Certificate(279.9 kB, PDF)
Manuals
VP-25XL Linear Stages User's Manual(1.5 MB, PDF)
Technical Notes
Optical Fiber Alignment - White Paper(8.6 MB, PDF)
Application Notes
Surface Metrology.pdf(134.1 kB, PDF)
2D Product Drawings
M-VP-25XL-XYZR.pdf(190.1 kB, PDF) VP-25XL_Interface-S.pdf(75.2 kB, PDF)
Related Products
Compatible Controllers
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | XPS-D Universal High-Performance 1-8 Axis Motion Controller and Driver1XPS-D Universal High-Performance 1-8 Axis Motion Controller and Driver | |||||
 | XPS-RLD Universal High-Performance 1-4 Axis Motion Controller and Driver2XPS-RLD Universal High-Performance 1-4 Axis Motion Controller and Driver |
Notes:
- Requires XPS-DRV03 driver module and E5820A encoder adapter (E5820A included with the stage)
- Requires XPS-DRV03 driver module and E5820A encoder adapter (E5820A included with the stage)
Accessories
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | M-FK-BLXL-Allen Wrench Set, Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm, Metric | In Stock FREE 2-day shipping on thousands of products on Newport.com Learn More | ||||
 | MMCABLE-REGInline Regulator, 5 VDC, for MMCABLEs 5 m or longer | In Stock |
Similar Stage
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | M-VP-25XA-XYZLXYZ Linear Stage, 25 mm, 100 nm MIM, DC Servo, Tach, Metric, Left-handed | 10 Weeks |
Frequently Purchased Together
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | XPS-DRV03PWM Drive Module, High Performance, DC Motors | 3 Weeks | ||||
| M-VP-25XL-XYZLXYZ Linear Stage, 25 mm, 10 nm MIM, DC Servo, Tach, Metric, Left-handed | 3 Weeks | ||||
| XPS-D8Universal Motion Controller, High Performance, 8-axis, Ethernet | In Stock | ||||
| XPS-D6Universal Motion Controller, High Performance, 6-axis, Ethernet | In Stock |