Ergonomic Vision Isostation, 36 x 60 x 2.3 in. PG Breadboard, Rigid
The VIS3660-PG2-ERGN is a 36 x 60 x 33.8 in. working height Vision IsoStation Ergo workstation with a 2.3 in. thick PG Series breadboard. The Ergo Version of the workstation features more leg room for seated users and include the front hip guard with two arm rests. Vision IsoStation features a unique platform interface that acts as a docking surface, an accessory mount and a restraint to keep the breadboard atop the frame. The interface also features integrated float height indicators and frame bubble levels to make set-up and installation easier than ever. Integrated leveling feet and casters are included with the base model and a new roll-off crate make the Vision IsoStation easy to unpack, install and move, even for one person. The workstation could be field upgraded with isolators later. Specifications
Type
Rigid Workstation
Platform
PG Series Breadboard
Broadband Damping
Patented modal damping, constrained layer core, damped working surface and composite edge finish
Width
36 in.
Length
60 in.
Thickness
2.3 in.
Working Surface
3/16 in. thick 400 series ferromagnetic stainless steel
Surface Flatness
±0.004 in. over 2 ft. square
Core Design
Trussed honeycomb, vertically bonded closed cell construction, 0.010 in. steel sheet materials, 0.030 in. triple core interface
Bottom Skin Material
0.134 in. thick carbon steel
Mounting Holes
1/4-20
Mounting Hole Pattern
1.0 in. grid
Mounting Hole Borders
0.5 in.
Mounting Hole Type
Cut (not rolled) threads with countersink
Hole Sealing Type
Easy clean conical cup 0.75 in. deep, non-corrosive high impact polymer material
Working Surface Height
33.8 in.
Height Adjustment
±0.2 in.
526 lb
Type
Rigid Workstation
Platform
PG Series Breadboard
Broadband Damping
Patented modal damping, constrained layer core, damped working surface and composite edge finish
Width
36 in.
Length
60 in.
Thickness
2.3 in.
Working Surface
3/16 in. thick 400 series ferromagnetic stainless steel
Surface Flatness
±0.004 in. over 2 ft. square
Core Design
Trussed honeycomb, vertically bonded closed cell construction, 0.010 in. steel sheet materials, 0.030 in. triple core interface
Bottom Skin Material
0.134 in. thick carbon steel
Mounting Holes
1/4-20
Mounting Hole Pattern
1.0 in. grid
Mounting Hole Borders
0.5 in.
Mounting Hole Type
Cut (not rolled) threads with countersink
Hole Sealing Type
Easy clean conical cup 0.75 in. deep, non-corrosive high impact polymer material
Working Surface Height
33.8 in.
Height Adjustment
±0.2 in.
526 lb
